|
| |
| |
 |
|
Parts in warehouse. |
|
Each and every parts unpacked and
inspected. |
|
Each leg is assembled
individually. Legs are in plastic bags to
prevent scratches. |
| |
|
|
|
|
|
| |
| |
 |
|
Seat assembly is attached to the
leg. All legs are in plastic bags. |
|
Assembled lower leg parts are
lined on the floor for individual inspection. |
|
Bottom of each legs are wrapped
in a Styrofoam sheet individually. |
| |
|
|
|
|
|
| |
| |
 |
|
Completed lower leg assembly is
protected by a large plastic bag to prevent
scratch during handling and transit. |
|
Plastic bag is tied to prevent an
accident tear. |
|
Each backrest is inspected and
wrapped at two sides to prevent friction damage
during transit. |
| |
|
|
|
|
|
| |
| |
 |
|
Each metal anchor plates are
installed individually. |
|
Inspection of finished top parts
individually and make sure all hardware is
included. |
|
Backrests to be packed. |
| |
|
|
|
|
|
| |
| |
 |
|
Leg assembly in the individual
carton. Notice enough space between stool and
inner side of the carton. |
|
Add one layer of corrugated paper
between leg assembly and top assembly to prevent
scratch during assembly. |
|
Top assembly is packed on the top
of leg assembly. Note the Styrofoam sheet
protector at the bottom end of backrest to
prevent friction damage. |
| |
|
|
|
|
 |
|
 |
|
 |
|
Insert one more corrugated sheet
to protect brass nail head from impact. |
|
UCC-128 label is attached and
wrapped around with plastic to prevent movement
during transit. |
|
Each pallet has 12" space around
pallet between carton and edge of pallet. This
space is to function as impact buffer during
transit. |
| |
|
|
|
|
| |
|
 |
|
|
| |
|
|
|
|
